08.26.09
Arc Flash Labels
I’ve been talking a lot about arc flash labels recently. The new NFPA 70E 2009 code has resulted in nearly everyone needing to review their existing labeling program and bring their arc flash labels into compliance with the new code. If you had been using the pre-formatted DuraLabel arc flash die-cut labels, with the arc flash software that comes with DuraLabel printers, your labels are okay. Of course, this also means that if you need to do arc flash labeling, getting a DuraLabel printer is the best way to go. Why?
One reason is because only DuraLabel printers give you four options for making arc flash labels.
1. Print die-cut arc flash labels, using the arc flash software included with DuraLabel printers, using pre-formatted die-cuts designed specifically for making standardized arc flash labels.
2. Print die-cut arc flash labels using blank die-cuts (with color headers) and using either the DuraLabel arc flash software, or other software such as MS Word or Excel.
3. Print SUPER-SIZED (up to 6.8″ x 10.5″) arc flash die-cut labels for greater visibility, or to serve as signs on cabinets and doorways.
4. Print arc flash labels using two-color vinyl. This provides a white label with a color strip at the top — such as an orange stripe for a warning label. Labels can be make to any required width. Any software (including ETAP, ESA & SKM) can be used for printing this type of label. The DuraLabel printer does not limit you on software that can be used.
5. Print arc flash labels using single color vinyl. This provides the greatest flexibility as there are no formatting limits on the label.
Ooops… that’s five options for printing arc flash labels using a DuraLabel printer. More options that even I thought were available!
08.12.09
130 Page Arc Flash Solutions Handbook
It’s not often that you can get a handbook like this free… but that’s the offer from graphic Products. You can get the latest edition of the Arc Flash Solutions Handbook… FREE… with no purchase required.
This 130+ page handbook is a complete resource for arc flash safety. It will take you through all of the steps needed for establishing an arc flash assessment program, and incorporating it into your overall safety program requirements. It provides practical information that helps improve staff safety, plant profitability and compliance with arc flash codes.
The topics covered include:
- Planning For An Arc Flash Hazard Program
- Arc Flash Calculation Methods
- Practical Steps To Arc Flash Calculations
- Limiting Arc Exposure
- Personal Protective Equipment
- Arc Flash Hazard Program
Use the link above to request your free copy.
Related Past Posts
New Arc Flash Labeling Best Practices
New 2009 Arc Flash Labeling Requirements
Saving Families With Arc Flash Labels
08.11.09
New Medical Facility Labeling Guide
A new, one-page quick reference guide to the NFPA labeling and signage requirements for medical facilities is available from Graphic Products. This guide shows the various NFPA requirements for labels and signs in a medical facility and provides examples of the applications requiring labeling and signs. Use this new guide to help ensure your facility is incompliance with NFPA codes.
DuraLabel is the manufacturer of the new LabPRO label printer, a printer designed for hospitals, medical facilities and laboratories. With the wide range of supplies available for the LabPRO, it is a versatile tool that has a short ROI. Available materials include cryogenic tapes, high temperature tapes, and of course DuraLabel’s premium quality continuous vinyl, two-color vinyl and die-cut labels.
08.07.09
High Visibility Reflective Pipe Markers
When you need pipes that are easy to spot and identify under low light conditions, then make those pipes with reflective pipe markers. When you need to quickly pick out critical pipes during an emergency, reflective pipe markers will stand out when illuminated by a flashlight. You’ll be able to quickly identify critical pipes and trace lines back to the nearest shut-off valve.
Valve tags can also be made using reflective DuraLabel supplies. This makes them easier to read in low light conditions.
DuraLabel reflective vinyl tapes are fully compliant with code requirements for pipe markers.
DuraLabel brand printers that can be use reflective vinyl include the DuraLabel PRO and DuraLabel PRO 300, both are four inch wide printers, as well as the wide format DuraLabel 7000 and 9000 printers.
Pipe markers made using DuraLabel printers are in use around the world. Whether you need standard (non-reflective) vinyl, reflective vinyl, or a highly specialized supply, DuraLabel printers have more types of supplies available than any other brand of label printer. Call 1-888-326-9244.
